Difference between revisions of "Building on Ubuntu 18"

Revision as of 16:52, 19 April 2019

This page is under construction.

Building GridPACK on Ubuntu 18.04 is slightly more complicated than building it on Ubuntu 16.04. The main differences are that 1) the PPN build does not work for this version of Ubuntu and 2) the Global Arrays library must be built by hand. MPI, Boost and PETSc can all be installed using the package manager. This example was performed on a Virtual Box instance running a clean install of Ubuntu Linux 18.04 (LTS). Virtual Box is not required and this build should work on Linux systems using the Ubuntu operating system. You will need super user or sudo privileges for this installation.

A few basic development packages will be necessary. Install them with

sudo apt-get install git build-essential devscripts equivs

Install Required Packages

Before installing the remaining packages, you must first download GridPACK onto your computer and put it in a convenient directory. Information on how to download and install GridPACK can be found here.

All the GridPACK prerequisites packages can be installed using the packaging information in the source. Run this command in the top directory of the cloned repository:

sudo mk-build-deps -i

This will make and install a virtual package called gridpack-build-deps with most of the dependencies needed to build GridPACK.

Build and Install Global Arrays

Get the Global Arrays source from the release page. We recommend using version 5.6 or 5.7 but any recent version should work. Unpack GA in a convenient location. In the unpacked directory, configure, build, and install using

   ./configure --enable-i4 --without-blas --enable-cxx --with-mpi-ts --disable-f77 \
       --prefix="/home/gridpack/software/ga-5.7"
   make
   make install 

Be sure and replace the install directory in red with an appropriate directory on your local system.

Build and Test GridPACK

Obtain the GridPACK release or development code and put it in a convenient directory.

Configure and build GridPACK using the recipe for gridpackvm in example_configuration.sh. From the top-most GridPACK source directory, do the following:

mkdir src/build
cd src/build
bash ../example_configuration.sh gridpackvm
make 
make test

Or, modify this configuration recipe to fit your needs:

 rm -rf CMake*
 export CC=gcc
 export CXX=g++
 
 cmake  \
   -D PETSC_DIR:STRING="/usr/lib/petsc" \
   -D PARMETIS_DIR:PATH="/usr" \
   -D GA_DIR:STRING="/home/gridpack/software/ga-5.7" \
   -D MPI_CXX_COMPILER:STRING="mpicxx" \
   -D MPI_C_COMPILER:STRING="mpicc" \
   -D MPIEXEC:STRING="mpiexec" \
   -D MPIEXEC_MAX_NUMPROCS:STRING="2" \
   -D GRIDPACK_TEST_TIMEOUT:STRING="20" \
   -D USE_GLPK:BOOL=ON \
   -D GLPK_ROOT_DIR:PATH="/usr" \
   -D BUILD_SHARED_LIBS:BOOL=OFF \
   -D CMAKE_INSTALL_PREFIX:PATH="/home/gridpack/gridpack-3.3/src/build/install" \
    CC=gcc CXX=g++ ..
 
 make

Again, be sure and modify the Global Array directory and the GridPACK installation directories in red to match the appropriate locations on your local system.

If compilation is successful, the unit tests and/or example applications can be run.

Removing Required Software

If no longer needed, the required packages can be removed using

sudo apt-get purge gridpack-build-deps
sudo apt autoremove