Troubleshooting GridPACK Builds

This page is under construction

This page is a collection of trouble shooting tips that have proven useful in the past. If you run into problems building GridPACK or its associated libraries, you may find some useful suggestions here. If you continue to have problems, feel free to contact us.

Boost

Mismatch between compiler and Boost versions: Boost employs the latest features in C++ and a Boost version that was released much later than the compiler version may not compile. You can fix this by using an earlier version of Boost.

PETSc

Configuration error messages: The error messages that PETSc provides during configuration are frequently informative and can provide important information on why configuration failed, as well as pointing to potential solutions. Check these first.

configure.log: The configure.log file in the PETSc build directory can provide additional information on diagnosing build problems. You can identify which test failed and possibly get information on compiler errors from this file.

Noexec flag on /tmp: This error (which is currently rare) occurs if /tmp has been mounted on your system with the noexec flag set. This flag will prevent you from executing anything in /tmp, even if the executable bit has been set on the file. PETSc uses this directory to create temporary files as part of its configuration process. For PETSc versions later than 3.6, you should be able to get around this problem by setting the TMPDIR environment to some directory where you have both write and execute permissions. This problem is difficult to diagnose and your best bet may be to just try setting TMPDIR and see if your configuration problems go away. On some systems, you may be able to see if the noexec flag is set by typing

   findmnt --target /tmp

The PETSc development team is aware of this problem and may provide a fix, or at least better diagnostics, in a later release (post 3.9.2).