Difference between revisions of "Building on Ubuntu"

From GridPACK
Jump to: navigation, search
(Building and Testing GridPACK)
Line 52: Line 52:
 
GridPACK was configured and built as follows:  
 
GridPACK was configured and built as follows:  
  
    prefix="/usr/local/gridpack"
+
  prefix="/usr/local/gridpack"
    cmake -Wno-dev --debug-try-compile \
+
  cmake -Wno-dev --debug-try-compile \
-D PETSC_DIR:STRING="/usr/lib/petscdir/3.6.2" \
+
      -D PETSC_DIR:STRING="/usr/lib/petscdir/3.6.2" \
-D PETSC_ARCH:STRING="x86_64-linux-gnu-real" \
+
      -D PETSC_ARCH:STRING="x86_64-linux-gnu-real" \
-D GA_DIR:STRING="$prefix" \
+
      -D GA_DIR:STRING="$prefix" \
-D MPI_CXX_COMPILER:STRING="mpicxx" \
+
      -D MPI_CXX_COMPILER:STRING="mpicxx" \
-D MPI_C_COMPILER:STRING="mpicc" \
+
      -D MPI_C_COMPILER:STRING="mpicc" \
-D MPIEXEC:STRING="mpiexec" \
+
      -D MPIEXEC:STRING="mpiexec" \
        -D MPIEXEC_MAX_NUMPROCS:STRING="2" \
+
      -D MPIEXEC_MAX_NUMPROCS:STRING="2" \
        -D GRIDPACK_TEST_TIMEOUT:STRING=20 \
+
      -D GRIDPACK_TEST_TIMEOUT:STRING=20 \
        -D USE_GLPK:BOOL=OFF \
+
      -D USE_GLPK:BOOL=OFF \
        -D CMAKE_INSTALL_PREFIX:PATH="$prefix" \
+
      -D CMAKE_INSTALL_PREFIX:PATH="$prefix" \
..
+
      ..
 
     make  
 
     make  
 
     make test
 
     make test

Revision as of 21:54, 30 September 2016

This build was performed on a Virtual Box instance running a clean install of Ubuntu Linux 16.04 (LTS). Most of the prerequisite software was installed using Ubuntu packages. Any packages that needed to be built from source were installed in /usr/local/gridpack

Boost was installed like this

 sudo apt-get install libboost-all-dev

This installed a C++ compiler and OpenMPI compiler wrappers, as well as all of Boost. Other available packages were installed using

 sudo apt-get install openmpi-bin make cmake git gfortran liblapack-dev doxygen

The doxygen package can be skipped, since it installs a large number of dependencies. A compatible ParMETIS package is available, so install that

 sudo apt-get install libmetis-dev libparmetis-dev

The free GNU linear programming kit can be installed and used by GridPACK for optimization, if desired

 sudo apt-get install glpk-utils  libglpk-dev

PETSc

Ubuntu packages for PETSc 3.6 were available. These can be installed with

 sudo apt-get petsc3.6-dev petsc-complex-3.6-dev

These are built with several optional packages, including Hypre, SuiteSparse, and MUMPS. SuperLU is also include, not SuperLU_DIST, which will limit direct linear solver methods in parallel. Alternatively, PETSc can be built from source.

Global Arrays

Global Arrays from SVN was configured, built, and installed as follows:

 svn co https://svn.pnl.gov/svn/hpctools/trunk/ga ga-trunk
 cd ga-trunk
 prefix="/usr/local/gridpack"
 ./configure \
     --enable-cxx \
     --enable-i4 \
     --disable-f77 \
     --with-mpi \
     --prefix="$prefix" \
     --with-blas=no \
     --with-lapack=no \
     --enable-shared=no \
     --enable-static=yes \
     MPICC=mpicc MPICXX=mpicxx MPIF77=mpif90 \
     MPIEXEC=mpiexec MPIRUN=mpirun
 make
 sudo make install


Building and Testing GridPACK

GridPACK was configured and built as follows:

 prefix="/usr/local/gridpack"
 cmake -Wno-dev --debug-try-compile \
     -D PETSC_DIR:STRING="/usr/lib/petscdir/3.6.2" \
     -D PETSC_ARCH:STRING="x86_64-linux-gnu-real" \
     -D GA_DIR:STRING="$prefix" \
     -D MPI_CXX_COMPILER:STRING="mpicxx" \
     -D MPI_C_COMPILER:STRING="mpicc" \
     -D MPIEXEC:STRING="mpiexec" \
     -D MPIEXEC_MAX_NUMPROCS:STRING="2" \
     -D GRIDPACK_TEST_TIMEOUT:STRING=20 \
     -D USE_GLPK:BOOL=OFF \
     -D CMAKE_INSTALL_PREFIX:PATH="$prefix" \
     ..
   make 
   make test