Difference between revisions of "How to Build GridPACK"

From GridPACK
Jump to: navigation, search
m
 
(52 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
== Overview ==
 
== Overview ==
  
This section will provide a brief overview of how to configure and build GridPACK. More detail can be found by looking at builds of GridPACK on specific systems by following the links in the Examples section at the bottom of this page. These provide complete scripts for building GridPACK and its associated libraries. We strongly recommend that you find an example that is similar to the system you are planning on building on and examine the scripts for that system before attempting to build GridPACK. Users will need to make sure that they have a compiler on their system (we have used GNU and Intel compilers to build GridPACK), an MPI library and CMake (version 2.8.8 or greater).
+
This section will provide a brief overview of how to configure and build GridPACK and its associated libraries. More detail can be found by looking at builds of GridPACK on specific systems. These can be found by following the links below. These examples provide complete instructions for building GridPACK and its associated libraries. We strongly recommend that you find an example that is similar to the system you are planning on building on and examine the commands for that system before attempting to build GridPACK. Users will need to make sure that they have a compiler on their system (we have used GNU and Intel compilers to build GridPACK), an MPI library and CMake (version 2.8.8 or greater).
  
If new to building GridPACK, it's usually best to start from a working example. Below, are detailed descriptions of building GridPACK on some specific platforms that contain scripts for building GridPACK and its associated libraries.
+
More general information on configuring the GridPACK build can be found in the sections below and additional information on libraries used by GridPACK can be found [[Software Required to Build GridPACK | here]].
  
* [[Building_on_Mac_Yosemite | Mac OS X (Yosemite) with MacPorts]]
+
* [[Building_on_Ubuntu | Ubuntu Linux 16.04]]
* [[Building_on_RHEL5 | Red Hat Enterprise Linux 5]]
+
* [[Building_on_Ubuntu_18 | Ubuntu Linux 18.04]]
* [[Building_on_Ubuntu | Ubuntu Linux]]
+
* [[Building_on_Debian | Debian Linux]]
* [[Building_on_Olympus | PNNL PIC Cluster (Linux cluster with Infiniband)]]
+
* [[Building_on_CentOS7 | CentOS or RHEL 7]]
* [[Building_on_Windows | Native Windows Port]]
+
* [[Building_on_CentOS6 | CentOS or RHEL 6]]
 +
* [[Building_on_a_Linux_Cluster | PNNL PIC Cluster (Linux cluster with Infiniband)]]
 +
* [[Building_on_Mac_High_Sierra | Mac OS X (High Sierra) with MacPorts]]
  
 +
If you run into problems, feel free to contact us for further help. You can also look at our [[Troubleshooting_GridPACK_Builds | troubleshooting page]].
  
 
== Prerequisite Software ==
 
== Prerequisite Software ==
Line 16: Line 19:
 
Currently, GridPACK builds on Linux/UNIX sytems. Other operating systems are not supported at this time.  
 
Currently, GridPACK builds on Linux/UNIX sytems. Other operating systems are not supported at this time.  
  
Building GridPACK is relatively complicated, primarily because it depends on several third-party software packages.  These need to be built and installed prior to building GridPACK. Refer to the list of [[Software Required to Build GridPACK|required software]] for what is needed. Detailed information on building these packages on different platforms is available on the links listed below for building GridPACK on different platforms.
+
Building GridPACK can be complicated, primarily because it depends on several third-party software packages.  These need to be built and installed prior to building GridPACK. Refer to the list of [[Software Required to Build GridPACK|required software]] for what is needed. Detailed information on building these packages on different platforms is available on the links listed above for building GridPACK on different platforms. More information on the individual libraries can be found on the[[Software Required to Build GridPACK | software required to build GridPACK page]].
 +
 
 +
GridPACK requires the MPI, [https://github.com/GlobalArrays/ga/releases Global Arrays], [https://www.boost.org/users/download Boost], [https://www.mcs.anl.gov/petsc/download/index.html PETSc] and [http://glaros.dtc.umn.edu/gkhome/metis/parmetis/download Parmetis] libraries to build. The Parmetis libraries can usually be downloaded and built when configuring and building PETSc and this is the preferred way of obtaining Parmetis. If necessary, Parmetis can be downloaded and built separately.
 +
 
 +
Some version of MPI is already available on most clusters, but users may need to build their own copy of MPI if running on a workstation. Several versions of MPI, including [https://www.open-mpi.org OpenMPI], [http://www.mpich.org/downloads MPICH] and [http://mvapich.cse.ohio-state.edu/downloads MVAPICH] are available for free. There are also commercial implementations, such as Intel MPI, that can be used.
 +
 
 +
In general, it is a good idea to build Boost, Global Arrays and PETSc yourself. This guarantees that all libraries are using the same compiler and version of MPI. Compilers that have been used to build GridPACK include the GNU and Intel compilers. The instructions for building these libraries vary from one platform to the next. Users should consult the list of builds above and find one that most resembles the platform you wish to build on. The scripts in these builds can then be adapted for your system. For Linux workstations and clusters, the builds for a [[Building_on_RHEL |Redhat workstation]] or an [[Building_on_a_Linux_Cluster|Infiniband cluster]] are a good place to start. Builds for [[Building_on_CentOS6|CentOS]], [[Building_on_Debian|Debian]] and [[Building_on_Ubuntu|Ubuntu]] Linux are also available. For the Apple computers, we have a [[Building_on_Mac_High_Sierra |MacPorts build]] that has been demonstrated on the High Sierra OS. These builds may require modifications if your system differs from those listed, but modifications should be small. If you have problems, feel free to contact us for additional help.
 +
 
 +
== Obtaining GridPACK Source ==
 +
 
 +
GridPACK source code can be obtained in two ways. Users interested in obtaining the latest improvements to GridPACK can download the source code directly by cloning the [https://github.com/GridOPTICS/GridPACK GridPACK Github repository].  The GridPACK build system uses some third-party code that is included as a submodule. After cloning GridPACK, it is absolutely ''imperative'' to do the following in the top-most directory of your clone to get the submodule code:
 +
 
 +
    git submodule update --init
 +
`
  
GridPACK requires the MPI, [http://hpc.pnl.gov/globalarrays/download.shtml Global Arrays], [http://hpc.pnl.gov/globalarrays/download.shtml Boost], [http://hpc.pnl.gov/globalarrays/download.shtml PETSc] and [http://glaros.dtc.umn.edu/gkhome/metis/parmetis/download Parmetis] libraries to build. The Parmetis libraries can usually be downloaded and built when configuring and building PETSc and this is the preferred way of obtaining Parmetis. If necessary, Parmetis can be downloaded and built separately.
+
The code in the repository is undergoing constant revisions and may not be in a stable state. For most users, it is better to download the latest release from the [https://github.com/GridOPTICS/GridPACK/releases GridPACK release page]. This is in a compressed <code>tar</code> archive format file.   Unpack the archive in a convenient location using something like 
  
Some version of MPI is already available on most clusters, but users may need to build their own copy of MPI if running on a workstation. Several versions of MPI, including [https://www.open-mpi.org OpenMPI], [http://www.mpich.org/downloads MPICH] and [http://mvapich.cse.ohio-state.edu/downloads MVAPICH] are available for free. There are also commercial implementations, such as Intel MPI, that can also be used.
+
    tar xvf gridpack-X.X.tar.gz
  
In general, it is a good idea to build Boost, Global Arrays and PETSc yourself. This guarantees that all libraries are using the same compiler and version of MPI. Compilers that have been used to build GridPACK include the GNU and Intel compilers.
+
For further information on using <code>tar</code> archives, there are many [https://www.howtogeek.com/248780/how-to-compress-and-extract-files-using-the-tar-command-on-linux/ resources online] to help.
  
== Configuration ==
+
You do not need to run the git submodule command if you download one of the release tarballs. The tarballs already have the third party modules included.
  
Configuration is the most complicated part of the process. [https://cmake.org/download CMake] is used to configure GridPACK for building. CMake is usually available on most Linux systems but older versions of Linux may have a version of Cmake that is too old to build GridPACK. GridPACK requires version 2.8.8 or newer. If the installed version of CMake is too old, users will need to download CMake and build it themselves. The version of CMake can be found by typing
+
== Configuring GridPACK ==
 +
 
 +
Configuration is the most complicated part of the process of actually building GridPACK once all the libraries listed above are available. We recommend that you use one of the systems list above as a guide to configuring and building GridPACK. The information in this section is a general overview for configuring GridPACK and adjustments may be required to get the build to work on particular platforms. [https://cmake.org/download CMake] is used to configure GridPACK for building. CMake is usually available on most Linux systems but older versions of Linux may have a version of Cmake that is too old to build GridPACK. GridPACK requires version 2.8.8 or newer. If the installed version of CMake is too old, users will need to download CMake and build it themselves. The version of CMake can be found by typing
  
 
   cmake -version
 
   cmake -version
  
The configure process insures that required software is available and usable.  CMake expects to configure GridPACK in a directory other than the one containing the source code.  Typically, one makes an empty directory, called <code>build</code>, say, and executes
+
The configure process insures that required software is available and usable.  CMake expects to configure GridPACK in a directory other than the one containing the source code.  Typically, one makes an empty directory, usually called something like <code>build</code> and then cd's into this directory. The commands are
 +
 
 +
  mkdir build
 +
  cd build
 +
 
 +
Once in the build directory, execute the command
  
 
   cmake [options] gridpack/source/directory
 
   cmake [options] gridpack/source/directory
Line 54: Line 77:
  
 
   cmake -Wdev \
 
   cmake -Wdev \
       -D BOOST_ROOT:STRING='$HOME/software_new/boost_1_55_0' \
+
       -D BOOST_ROOT:STRING=<span style="color:red">'$HOME/software_new/boost_1_55_0'</span> \
       -D PETSC_DIR:STRING='$HOME/software_new/petsc-3.6.0' \
+
       -D PETSC_DIR:STRING=<span style="color:red">'$HOME/software_new/petsc-3.6.0'</span> \
       -D PETSC_ARCH:STRING='linux-openmpi-gnu-cxx' \
+
       -D PETSC_ARCH:STRING=<span style="color:red">'linux-openmpi-gnu-cxx'</span> \
 
       -D PARMETIS_DIR:STRING= \
 
       -D PARMETIS_DIR:STRING= \
         '$HOME/software_new/petsc-3.6.0/linux-openmpi-gnu-cxx/lib' \
+
         <span style="color:red">'$HOME/software_new/petsc-3.6.0/linux-openmpi-gnu-cxx/lib'</span> \
       -D GA_DIR:STRING='$HOME/software_new/ga-5-4-ib' \
+
       -D GA_DIR:STRING=<span style="color:red">'$HOME/software_new/ga-5-4-ib'</span> \
 
       -D USE_PROGRESS_RANKS:BOOL=FALSE \
 
       -D USE_PROGRESS_RANKS:BOOL=FALSE \
 
       -D GA_EXTRA_LIBS='-lrt -libverbs' \
 
       -D GA_EXTRA_LIBS='-lrt -libverbs' \
Line 65: Line 88:
 
       -D MPI_C_COMPILER:STRING='mpicc' \
 
       -D MPI_C_COMPILER:STRING='mpicc' \
 
       -D MPIEXEC:STRING='mpiexec' \
 
       -D MPIEXEC:STRING='mpiexec' \
       -D CMAKE_INSTALL_PREFIX:PATH='$GRIDPACK/src/build/install' \
+
       -D CMAKE_INSTALL_PREFIX:PATH=<span style="color:red">'$GRIDPACK/src/build/install'</span> \
 
       -D CMAKE_BUILD_TYPE:STRING='RELWITHDEBINFO' \
 
       -D CMAKE_BUILD_TYPE:STRING='RELWITHDEBINFO' \
 
       -D MPIEXEC_MAX_NUMPROCS:STRING="2" \
 
       -D MPIEXEC_MAX_NUMPROCS:STRING="2" \
Line 71: Line 94:
 
       ..
 
       ..
  
This example assumes that the build directory is immediately below the <code>GRIDPACK/src</code> directory. More information on the CMake options is available on the [[Software Required to Build GridPACK|required software]] page as well as the GridPACK [[Media:GridPack_Overview_v6_051717.pdf| overview document]] (see the section on configuring and building GridPACK). Additional examples can also be found in the pages describing builds on different platforms.
+
This example assumes that the build directory is immediately below the <code>GRIDPACK/src</code> directory so that the <tt>..</tt> at the end of this command are pointing to <code>GRIDPACK/src</code>. The directories shown in <span style="color:red">red</span> that are arguments to options like <tt>BOOST_ROOT</tt> and <tt>PETSC_DIR</tt> etc. should be replaced with locations of these libraries on your system. The <tt>PETSC_ARCH</tt> variable is also likely to depend on the particular build and will need to be modified by the user to reflect their system. More information on the CMake options is available on the [[Software Required to Build GridPACK|required software]] page as well as the GridPACK [[Media:GridPACK_User_Manual_3.2.pdf| overview document]] (see the section on configuring and building GridPACK). Additional examples can also be found in the pages describing builds on different platforms.
 +
 
 +
The Boost install directory is specified with the <tt>BOOST_ROOT</tt> option, the PETSc install directory and PETSc architecture are specified with the <tt>PETSC_DIR</tt> and <tt>PETSC_ARCH</tt> options. If ParMETIS has been downloaded and built as part of PETSc, it is unnecessary to specify the location of the ParMETIS installation and the <tt>PARMETIS_DIR</tt> option does not need to be included. If it ParMETIS has been installed separately, then the location of the ParMETIS and METIS libraries is specified by <tt>PARMETIS_DIR</tt>.
 +
 
 +
The installation directory for Global Arrays can be specified using the GA_DIR option. Extra libraries and compiler flags that may be needed by GA can be specified using the <tt>GA_EXTRA_LIBS</tt> option. For MPI-based runtimes, this option usually is not needed. If GA was built with the progress ranks runtime (<tt>--with-mpi-pr</tt>), then the <tt>USE_PROGRESS_RANKS</tt> option must be included and set to true. Otherwise, it can be left out or set to false.
 +
 
 +
The MPI compilers and execute commands are specified in the <tt>cmake</tt> command with the options
 +
 
 +
    -D MPI_CXX_COMPILER:STRING='mpicxx' \
 +
    -D MPI_C_COMPILER:STRING='mpicc' \
 +
    -D MPIEXEC:STRING='mpiexec' \
 +
 
 +
These options set the MPI wrappers for both the C and C++ compilers.
 +
 
 +
Some GridPACK-specific options are available for controlling the configuration:
 +
 
  
 
== Building ==
 
== Building ==
Line 91: Line 129:
 
   make test
 
   make test
  
which will produce a list of tests and whether they passed or failed.
+
or
 +
 +
  ctest
 +
 
 +
at the top of the GridPACK build directory. This will produce a list of tests and whether they passed or failed. While every effort is taken to make sure these tests pass, several things can lead to test failure, not just errors in GridPACK code, including OS, compilers, and requisite software versions. We cannot test all permutations.  Typical output from <code>ctest</code> might look like this (abridged example):
 +
 
 +
    Running tests...
 +
    /usr/bin/ctest3 --force-new-ctest-process
 +
    Test project /home/d3g096/Projects/GridPakLDRD/GridPACK.github/master/src/build
 +
          Start  1: greetings_serial
 +
    1/87 Test  #1: greetings_serial .....................  Passed    0.27 sec
 +
          Start  2: greetings_parallel
 +
    2/87 Test  #2: greetings_parallel ...................  Passed    0.32 sec
 +
    [...]
 +
          Start 68: state_estimation_serial
 +
    68/87 Test #68: state_estimation_serial ..............  Passed    0.30 sec
 +
          Start 69: state_estimation_parallel
 +
    69/87 Test #69: state_estimation_parallel ............***Failed    0.33 sec
 +
          Start 70: kalman_ds_serial
 +
    70/87 Test #70: kalman_ds_serial .....................  Passed    2.88 sec
 +
          Start 71: kalman_ds_parallel
 +
    71/87 Test #71: kalman_ds_parallel ...................***Failed    0.45 sec
 +
          Start 72: hello_world_serial
 +
    72/87 Test #72: hello_world_serial ...................  Passed    0.29 sec
 +
          Start 73: hello_world_parallel
 +
    73/87 Test #73: hello_world_parallel .................  Passed    0.34 sec
 +
    [...]
 +
   
 +
    98% tests passed, 2 tests failed out of 87
 +
   
 +
    Total Test time (real) =  67.29 sec
 +
   
 +
    The following tests FAILED:
 +
            69 - state_estimation_parallel (Failed)
 +
            71 - kalman_ds_parallel (Failed)
 +
    Errors while running CTest
 +
 
 +
In most cases, there is a <code>serial</code> and <code>parallel</code> versions of each test.  Note that, in this example, two tests were reported as failed and the reason was very helpfully reported as <code>Failed</code>.  If the test is marked as <code>Failed</code> without any further information, it could mean the test crashed and did not run to completion or it did run to completion and the output indicated it failed..  Very often tests are reported to fail because of a <code>Timeout</code>, which means the test ran, but longer than was allowed.  If this happens, the test timeout needs to be increased. When configuring GridPACK, add an option to cmake like
 +
 
 +
    -D GRIDPACK_TEST_TIMEOUT:STRING=30
 +
 
 +
which indicates any unit is only allowed to run for 30 seconds before is killed.  Another common failure is reported by <code>ctest</code> as <code>Required regular expression not found</code>. This means that the test ran to completion, but the output was not recognized as a correct.  Most of the time this indicates a real error, but sometimes, particularly with parallel tests,
 +
 
 +
If lots of tests fail, there is probably some problem with the GridPACK configuration or some other system setup (like MPI peculiarities). If only a few tests fail, they can probably be ignored, unless the test failure indicates some functionality of importance to you.  If a test fails, it possible that a bug report has been made. Check [https://github.com/GridOPTICS/GridPACK/issues current issues] to see.
 +
 
 +
Failed tests can be diagnosed by running them individually and looking at the output.  For example, to run test 2 only, run <code>ctest</code> at the top of the GridPACK build directory like this
 +
 
 +
    ctest -VV -I 2,2
 +
 
 +
This produces something like
 +
 
 +
    r/src/build/DartConfiguration.tcl
 +
    UpdateCTestConfiguration  from :/home/d3g096/Projects/GridPakLDRD/GridPACK.github/master/src/build/DartConfiguration.tcl
 +
    Test project /home/d3g096/Projects/GridPakLDRD/GridPACK.github/master/src/build
 +
    Constructing a list of tests
 +
    Done constructing a list of tests
 +
    Checking test dependency graph...
 +
    Checking test dependency graph end
 +
    test 2
 +
        Start 2: greetings_parallel
 +
   
 +
    2: Test command: /usr/lib64/openmpi/bin/mpiexec "-n" "4" "greetings"
 +
    2: Test timeout computed to be: 9.99988e+06
 +
    2: I am process 0 of 4.
 +
    2:
 +
    2: Creating communicators using split:
 +
    2:
 +
    2: I am process 1 of 4.
 +
    2: I am process 2 of 4.
 +
    2: I am process 3 of 4.
 +
    2: I am process 0 (original process is 0) of 2 on communicator 0.
 +
    2: I am process 1 (original process is 1) of 2 on communicator 0.
 +
    2: I am process 0 (original process is 2) of 2 on communicator 1.
 +
    2: I am process 1 (original process is 3) of 2 on communicator 1.
 +
    2:
 +
    2: Creating communicators using divide:
 +
    2:
 +
    2: I am process 0 (original process is 2) of 2.
 +
    2: (assignment) I am process 0 (original process is 2) of 2.
 +
    2: (copy) I am process 0 (original process is 2) of 2.
 +
    2: I am process 1 (original process is 3) of 2.
 +
    2: (assignment) I am process 1 (original process is 3) of 2.
 +
    2: (copy) I am process 1 (original process is 3) of 2.
 +
    2: I am process 1 (original process is 1) of 2.
 +
    2: (assignment) I am process 1 (original process is 1) of 2.
 +
    2: (copy) I am process 1 (original process is 1) of 2.
 +
    2: I am process 0 (original process is 0) of 2.
 +
    2:
 +
    2: Testing assignment operator for communicators:
 +
    2:
 +
    2: (assignment) I am process 0 (original process is 0) of 2.
 +
    2:
 +
    2: Testing copy constructor for communicators:
 +
    2:
 +
    2: (copy) I am process 0 (original process is 0) of 2.
 +
    2:
 +
    2: Testing summation operator for communicators
 +
    2:
 +
    2:
 +
    2: Summation test for communicators passed
 +
    2:
 +
    1/1 Test #2: greetings_parallel ...............  Passed    0.31 sec
 +
   
 +
    100% tests passed, 0 tests failed out of 1
 +
   
 +
    Total Test time (real) =  0.32 sec
 +
 
 +
If you wish to report a bug about a failed unit test, run the test as described and post it with the bug report. 
 +
 
 +
== Running the Powerflow Example(s) ==
 +
 
 +
If desired, the powerflow example application can be run on a number of different networks.  Starting from the top GridPACK build directory, change into the powerflow application build directory:
 +
 
 +
    cd applications/powerflow
 +
 
 +
Run the IEEE 14 bus problem serially using
 +
 
 +
    ./pf.x input_14.xml
 +
 
 +
or in parallel using
 +
 
 +
    mpiexec -np 2 ./pf.x input_14.xml
 +
 
 +
(but don't use too many processors).  The important part of the output from this case looks like
 +
 
 +
  Branch Power Flow
 +
 
 +
        Bus 1      Bus 2  CKT        P                    Q
 +
          1          2    BL    156.882891          -20.404292
 +
          1          5    BL      75.510382            3.854991
 +
          2          3    BL      73.237579            3.560203
 +
          2          4    BL      56.131496            -1.550350
 +
          2          5    BL      41.516215            1.170998
 +
          3          4    BL    -23.285690            4.473116
 +
          4          5    BL    -61.158230            15.823642
 +
          4          7    BL      28.074176            -9.681066
 +
          4          9    BL      16.079758            -0.427611
 +
          5          6    BL      44.087321            12.470680
 +
          6          11    BL      7.353277            3.560473
 +
          6          12    BL      7.786067            2.503414
 +
          6          13    BL      17.747977            7.216575
 +
          7          8    BL      -0.000000          -17.162971
 +
          7          9    BL      28.074176            5.778691
 +
          9          10    BL      5.227552            4.219138
 +
          9          14    BL      9.426381            3.610006
 +
        10          11    BL      -3.785322            -1.615063
 +
        12          13    BL      1.614258            0.753959
 +
        13          14    BL      5.643851            1.747174
 +
 
 +
  Generator Power
 +
 
 +
  Bus Number  GenID        Pgen              Qgen
 +
          1      1      2.323933        -0.165493
 +
          2      1      0.400000          0.435571
 +
          3      1      0.000000          0.250753
 +
          6      1      0.000000          0.127309
 +
          8      1      0.000000          0.176235
 +
 
 +
  Bus Voltages and Phase Angles
 +
 
 +
  Bus Number      Phase Angle      Voltage Magnitude
 +
          1          0.000000            1.060000
 +
          2        -4.982589            1.045000
 +
          3        -12.725100            1.010000
 +
          4        -10.312901            1.017671
 +
          5        -8.773854            1.019514
 +
          6        -14.220946            1.070000
 +
          7        -13.359627            1.061520
 +
          8        -13.359627            1.090000
 +
          9        -14.938521            1.055932
 +
        10        -15.097288            1.050985
 +
        11        -14.790622            1.056907
 +
        12        -15.075585            1.055189
 +
        13        -15.156276            1.050382
 +
        14        -16.033645            1.035530
 +
 
 +
 
 +
 
 +
 
 +
 
 +
Input for other networks are available:
 +
 
 +
* <code>input_118.xml</code>: a (IEEE?) 118 bus case
 +
* <code>input_polish.xml</code>: Polish network model with 3120 buses and 3684 branches
 +
* <code>input_european.xml</code>: European network model with 13659 buses and 18625 branches
 +
 
 +
for which more processors can be deployed.
 +
 
 +
== Obsolete/Invalid Build Cases ==
 +
 
 +
The GridPACK build descriptions listed here are considered obsolete, invalid, or simply don't work. They  still, however, may include useful information to those trying to build GridPACK and have conditions that don't exactly match the descriptions [[#Overview | above]], so they remain online.  <span style="color:red">Read and follow and your own risk!</span>
 +
 
 +
* [[Building_on_RHEL | Red Hat Enterprise Linux Workstation]]
 +
* [[Building_on_Mac_Yosemite | Mac OS X (Yosemite) with MacPorts]]
 +
<!-- * [[Building_on_Windows | Native Windows Port]] -->

Latest revision as of 02:20, 28 October 2020

Overview

This section will provide a brief overview of how to configure and build GridPACK and its associated libraries. More detail can be found by looking at builds of GridPACK on specific systems. These can be found by following the links below. These examples provide complete instructions for building GridPACK and its associated libraries. We strongly recommend that you find an example that is similar to the system you are planning on building on and examine the commands for that system before attempting to build GridPACK. Users will need to make sure that they have a compiler on their system (we have used GNU and Intel compilers to build GridPACK), an MPI library and CMake (version 2.8.8 or greater).

More general information on configuring the GridPACK build can be found in the sections below and additional information on libraries used by GridPACK can be found here.

If you run into problems, feel free to contact us for further help. You can also look at our troubleshooting page.

Prerequisite Software

Currently, GridPACK builds on Linux/UNIX sytems. Other operating systems are not supported at this time.

Building GridPACK can be complicated, primarily because it depends on several third-party software packages. These need to be built and installed prior to building GridPACK. Refer to the list of required software for what is needed. Detailed information on building these packages on different platforms is available on the links listed above for building GridPACK on different platforms. More information on the individual libraries can be found on the software required to build GridPACK page.

GridPACK requires the MPI, Global Arrays, Boost, PETSc and Parmetis libraries to build. The Parmetis libraries can usually be downloaded and built when configuring and building PETSc and this is the preferred way of obtaining Parmetis. If necessary, Parmetis can be downloaded and built separately.

Some version of MPI is already available on most clusters, but users may need to build their own copy of MPI if running on a workstation. Several versions of MPI, including OpenMPI, MPICH and MVAPICH are available for free. There are also commercial implementations, such as Intel MPI, that can be used.

In general, it is a good idea to build Boost, Global Arrays and PETSc yourself. This guarantees that all libraries are using the same compiler and version of MPI. Compilers that have been used to build GridPACK include the GNU and Intel compilers. The instructions for building these libraries vary from one platform to the next. Users should consult the list of builds above and find one that most resembles the platform you wish to build on. The scripts in these builds can then be adapted for your system. For Linux workstations and clusters, the builds for a Redhat workstation or an Infiniband cluster are a good place to start. Builds for CentOS, Debian and Ubuntu Linux are also available. For the Apple computers, we have a MacPorts build that has been demonstrated on the High Sierra OS. These builds may require modifications if your system differs from those listed, but modifications should be small. If you have problems, feel free to contact us for additional help.

Obtaining GridPACK Source

GridPACK source code can be obtained in two ways. Users interested in obtaining the latest improvements to GridPACK can download the source code directly by cloning the GridPACK Github repository. The GridPACK build system uses some third-party code that is included as a submodule. After cloning GridPACK, it is absolutely imperative to do the following in the top-most directory of your clone to get the submodule code:

   git submodule update --init

`

The code in the repository is undergoing constant revisions and may not be in a stable state. For most users, it is better to download the latest release from the GridPACK release page. This is in a compressed tar archive format file. Unpack the archive in a convenient location using something like

   tar xvf gridpack-X.X.tar.gz

For further information on using tar archives, there are many resources online to help.

You do not need to run the git submodule command if you download one of the release tarballs. The tarballs already have the third party modules included.

Configuring GridPACK

Configuration is the most complicated part of the process of actually building GridPACK once all the libraries listed above are available. We recommend that you use one of the systems list above as a guide to configuring and building GridPACK. The information in this section is a general overview for configuring GridPACK and adjustments may be required to get the build to work on particular platforms. CMake is used to configure GridPACK for building. CMake is usually available on most Linux systems but older versions of Linux may have a version of Cmake that is too old to build GridPACK. GridPACK requires version 2.8.8 or newer. If the installed version of CMake is too old, users will need to download CMake and build it themselves. The version of CMake can be found by typing

 cmake -version

The configure process insures that required software is available and usable. CMake expects to configure GridPACK in a directory other than the one containing the source code. Typically, one makes an empty directory, usually called something like build and then cd's into this directory. The commands are

 mkdir build
 cd build

Once in the build directory, execute the command

 cmake [options] gridpack/source/directory

where options are used to locate required software and set compiler options. The shell script example_configuration.sh shows some examples of configuration options for a few systems. If you don't get the configure right the first time, then you should make sure that you get rid of all the files that CMake created when you tried configuring previously. This can be done by typing

 rm -rf CMake*

in your build directory. This will remove all CMake-related configuration files from your build directory so that the new build is not corrupted by the previous build. If you are using a script to configure GridPACK, then you should include this line at the start of the script.

To guarantee that CMake finds the correct C and C++ compilers, you should define the environment variables CC and CXX (if you are trying to build the Fortran interface, you should define FC and F77 as well). In addition, it may also be necessary to define CFLAGS = "-pthread" etc. depending on how some of the other libraries were built. Using C-shell, the environment variables are

 setenv CC gcc
 setenv CFLAGS "-pthread"
 setenv CXX g++
 setenv CXXFLAGS "-pthread"
 setenv FC gfortran
 setenv FCFLAGS "-pthread"
 setenv F77 gfortran
 setenv F77FLAGS "-pthread"

A complete configuration line for GridPACK is

 cmake -Wdev \
     -D BOOST_ROOT:STRING='$HOME/software_new/boost_1_55_0' \
     -D PETSC_DIR:STRING='$HOME/software_new/petsc-3.6.0' \
     -D PETSC_ARCH:STRING='linux-openmpi-gnu-cxx' \
     -D PARMETIS_DIR:STRING= \
       '$HOME/software_new/petsc-3.6.0/linux-openmpi-gnu-cxx/lib' \
     -D GA_DIR:STRING='$HOME/software_new/ga-5-4-ib' \
     -D USE_PROGRESS_RANKS:BOOL=FALSE \
     -D GA_EXTRA_LIBS='-lrt -libverbs' \
     -D MPI_CXX_COMPILER:STRING='mpicxx' \
     -D MPI_C_COMPILER:STRING='mpicc' \
     -D MPIEXEC:STRING='mpiexec' \
     -D CMAKE_INSTALL_PREFIX:PATH='$GRIDPACK/src/build/install' \
     -D CMAKE_BUILD_TYPE:STRING='RELWITHDEBINFO' \
     -D MPIEXEC_MAX_NUMPROCS:STRING="2" \
     -D CMAKE_VERBOSE_MAKEFILE:STRING=TRUE \
     ..

This example assumes that the build directory is immediately below the GRIDPACK/src directory so that the .. at the end of this command are pointing to GRIDPACK/src. The directories shown in red that are arguments to options like BOOST_ROOT and PETSC_DIR etc. should be replaced with locations of these libraries on your system. The PETSC_ARCH variable is also likely to depend on the particular build and will need to be modified by the user to reflect their system. More information on the CMake options is available on the required software page as well as the GridPACK overview document (see the section on configuring and building GridPACK). Additional examples can also be found in the pages describing builds on different platforms.

The Boost install directory is specified with the BOOST_ROOT option, the PETSc install directory and PETSc architecture are specified with the PETSC_DIR and PETSC_ARCH options. If ParMETIS has been downloaded and built as part of PETSc, it is unnecessary to specify the location of the ParMETIS installation and the PARMETIS_DIR option does not need to be included. If it ParMETIS has been installed separately, then the location of the ParMETIS and METIS libraries is specified by PARMETIS_DIR.

The installation directory for Global Arrays can be specified using the GA_DIR option. Extra libraries and compiler flags that may be needed by GA can be specified using the GA_EXTRA_LIBS option. For MPI-based runtimes, this option usually is not needed. If GA was built with the progress ranks runtime (--with-mpi-pr), then the USE_PROGRESS_RANKS option must be included and set to true. Otherwise, it can be left out or set to false.

The MPI compilers and execute commands are specified in the cmake command with the options

   -D MPI_CXX_COMPILER:STRING='mpicxx' \
   -D MPI_C_COMPILER:STRING='mpicc' \
   -D MPIEXEC:STRING='mpiexec' \

These options set the MPI wrappers for both the C and C++ compilers.

Some GridPACK-specific options are available for controlling the configuration:


Building

Once configured, GridPACK is built with

 make

which will take some time. (The make command should be available by default on most Linux platforms.) If building on a multi-core system, building can go faster if multiple cores are use, e.g.,

 make -j 8

will use 8 simultaneous processes to build GridPACK. It is possible that you may run into problems building with multiple cores since some dependencies may get out of order. If the build stops, then try continuing using only 1 core.

Running Tests

After a successful build, GridPACK unit tests can be run with

 make test

or

 ctest

at the top of the GridPACK build directory. This will produce a list of tests and whether they passed or failed. While every effort is taken to make sure these tests pass, several things can lead to test failure, not just errors in GridPACK code, including OS, compilers, and requisite software versions. We cannot test all permutations. Typical output from ctest might look like this (abridged example):

   Running tests...
   /usr/bin/ctest3 --force-new-ctest-process 
   Test project /home/d3g096/Projects/GridPakLDRD/GridPACK.github/master/src/build
         Start  1: greetings_serial
    1/87 Test  #1: greetings_serial .....................   Passed    0.27 sec
         Start  2: greetings_parallel
    2/87 Test  #2: greetings_parallel ...................   Passed    0.32 sec
   [...]
         Start 68: state_estimation_serial
   68/87 Test #68: state_estimation_serial ..............   Passed    0.30 sec
         Start 69: state_estimation_parallel
   69/87 Test #69: state_estimation_parallel ............***Failed    0.33 sec
         Start 70: kalman_ds_serial
   70/87 Test #70: kalman_ds_serial .....................   Passed    2.88 sec
         Start 71: kalman_ds_parallel
   71/87 Test #71: kalman_ds_parallel ...................***Failed    0.45 sec
         Start 72: hello_world_serial
   72/87 Test #72: hello_world_serial ...................   Passed    0.29 sec
         Start 73: hello_world_parallel
   73/87 Test #73: hello_world_parallel .................   Passed    0.34 sec
   [...]
   
   98% tests passed, 2 tests failed out of 87
   
   Total Test time (real) =  67.29 sec
   
   The following tests FAILED:
            69 - state_estimation_parallel (Failed)
            71 - kalman_ds_parallel (Failed)
   Errors while running CTest

In most cases, there is a serial and parallel versions of each test. Note that, in this example, two tests were reported as failed and the reason was very helpfully reported as Failed. If the test is marked as Failed without any further information, it could mean the test crashed and did not run to completion or it did run to completion and the output indicated it failed.. Very often tests are reported to fail because of a Timeout, which means the test ran, but longer than was allowed. If this happens, the test timeout needs to be increased. When configuring GridPACK, add an option to cmake like

   -D GRIDPACK_TEST_TIMEOUT:STRING=30

which indicates any unit is only allowed to run for 30 seconds before is killed. Another common failure is reported by ctest as Required regular expression not found. This means that the test ran to completion, but the output was not recognized as a correct. Most of the time this indicates a real error, but sometimes, particularly with parallel tests,

If lots of tests fail, there is probably some problem with the GridPACK configuration or some other system setup (like MPI peculiarities). If only a few tests fail, they can probably be ignored, unless the test failure indicates some functionality of importance to you. If a test fails, it possible that a bug report has been made. Check current issues to see.

Failed tests can be diagnosed by running them individually and looking at the output. For example, to run test 2 only, run ctest at the top of the GridPACK build directory like this

   ctest -VV -I 2,2

This produces something like

   r/src/build/DartConfiguration.tcl
   UpdateCTestConfiguration  from :/home/d3g096/Projects/GridPakLDRD/GridPACK.github/master/src/build/DartConfiguration.tcl
   Test project /home/d3g096/Projects/GridPakLDRD/GridPACK.github/master/src/build
   Constructing a list of tests
   Done constructing a list of tests
   Checking test dependency graph...
   Checking test dependency graph end
   test 2
       Start 2: greetings_parallel
   
   2: Test command: /usr/lib64/openmpi/bin/mpiexec "-n" "4" "greetings"
   2: Test timeout computed to be: 9.99988e+06
   2: I am process 0 of 4.
   2: 
   2: Creating communicators using split:
   2: 
   2: I am process 1 of 4.
   2: I am process 2 of 4.
   2: I am process 3 of 4.
   2: I am process 0 (original process is 0) of 2 on communicator 0.
   2: I am process 1 (original process is 1) of 2 on communicator 0.
   2: I am process 0 (original process is 2) of 2 on communicator 1.
   2: I am process 1 (original process is 3) of 2 on communicator 1.
   2: 
   2: Creating communicators using divide:
   2: 
   2: I am process 0 (original process is 2) of 2.
   2: (assignment) I am process 0 (original process is 2) of 2.
   2: (copy) I am process 0 (original process is 2) of 2.
   2: I am process 1 (original process is 3) of 2.
   2: (assignment) I am process 1 (original process is 3) of 2.
   2: (copy) I am process 1 (original process is 3) of 2.
   2: I am process 1 (original process is 1) of 2.
   2: (assignment) I am process 1 (original process is 1) of 2.
   2: (copy) I am process 1 (original process is 1) of 2.
   2: I am process 0 (original process is 0) of 2.
   2: 
   2: Testing assignment operator for communicators:
   2: 
   2: (assignment) I am process 0 (original process is 0) of 2.
   2: 
   2: Testing copy constructor for communicators:
   2: 
   2: (copy) I am process 0 (original process is 0) of 2.
   2: 
   2: Testing summation operator for communicators
   2: 
   2: 
   2: Summation test for communicators passed
   2: 
   1/1 Test #2: greetings_parallel ...............   Passed    0.31 sec
   
   100% tests passed, 0 tests failed out of 1
   
   Total Test time (real) =   0.32 sec

If you wish to report a bug about a failed unit test, run the test as described and post it with the bug report.

Running the Powerflow Example(s)

If desired, the powerflow example application can be run on a number of different networks. Starting from the top GridPACK build directory, change into the powerflow application build directory:

   cd applications/powerflow

Run the IEEE 14 bus problem serially using

   ./pf.x input_14.xml

or in parallel using

   mpiexec -np 2 ./pf.x input_14.xml

(but don't use too many processors). The important part of the output from this case looks like

  Branch Power Flow
  
       Bus 1       Bus 2   CKT         P                    Q
         1           2     BL     156.882891           -20.404292
         1           5     BL      75.510382             3.854991
         2           3     BL      73.237579             3.560203
         2           4     BL      56.131496            -1.550350
         2           5     BL      41.516215             1.170998
         3           4     BL     -23.285690             4.473116
         4           5     BL     -61.158230            15.823642
         4           7     BL      28.074176            -9.681066
         4           9     BL      16.079758            -0.427611
         5           6     BL      44.087321            12.470680
         6          11     BL       7.353277             3.560473
         6          12     BL       7.786067             2.503414
         6          13     BL      17.747977             7.216575
         7           8     BL      -0.000000           -17.162971
         7           9     BL      28.074176             5.778691
         9          10     BL       5.227552             4.219138
         9          14     BL       9.426381             3.610006
        10          11     BL      -3.785322            -1.615063
        12          13     BL       1.614258             0.753959
        13          14     BL       5.643851             1.747174
  
  Generator Power
  
  Bus Number  GenID        Pgen              Qgen
         1       1       2.323933         -0.165493
         2       1       0.400000          0.435571
         3       1       0.000000          0.250753
         6       1       0.000000          0.127309
         8       1       0.000000          0.176235
  
  Bus Voltages and Phase Angles
  
  Bus Number      Phase Angle      Voltage Magnitude
         1          0.000000             1.060000
         2         -4.982589             1.045000
         3        -12.725100             1.010000
         4        -10.312901             1.017671
         5         -8.773854             1.019514
         6        -14.220946             1.070000
         7        -13.359627             1.061520
         8        -13.359627             1.090000
         9        -14.938521             1.055932
        10        -15.097288             1.050985
        11        -14.790622             1.056907
        12        -15.075585             1.055189
        13        -15.156276             1.050382
        14        -16.033645             1.035530



Input for other networks are available:

  • input_118.xml: a (IEEE?) 118 bus case
  • input_polish.xml: Polish network model with 3120 buses and 3684 branches
  • input_european.xml: European network model with 13659 buses and 18625 branches

for which more processors can be deployed.

Obsolete/Invalid Build Cases

The GridPACK build descriptions listed here are considered obsolete, invalid, or simply don't work. They still, however, may include useful information to those trying to build GridPACK and have conditions that don't exactly match the descriptions above, so they remain online. Read and follow and your own risk!